Is Vivotek a Chinese company?

VIVOTEK INC., established in Taiwan in 2000, has quickly grown into a prestigious leading manufacturer in the network video surveillance industry. In 2006, VIVOTEK (TAIEX: 3454) was listed on the Taiwan Stock Exchange. VIVOTEK has more than 120 authorized distributors in more than 70 countries. …

What is a Vivotek device?

Smart Management Tool. Device Center is an all-in-one management tool that facilitates the configuration of multiple counting cameras across different sites. It is especially valuable for projects involving multiple counting cameras with the same settings and for counting result analysis.

Where are Vivotek cameras manufactured?

Taiwan
Founded in Taiwan in 2000, Vivotek has established itself as a leading manufacturer in the network IP video surveillance industry.

Are Vivotek cameras Onvif?

The current firmware of Vivotek cameras does not support dedicated ONVIF user rights. The IT manager must ensure the appropriate security measures for unauthorized access to these cameras in the network to compensate for this limitation of Vivotek.

What is the default password for Vivotek IP cameras?

The default username and password for Vivotek cameras are admin/123456 for some models and the username is root with an empty password.

How do I update my vivotek firmware?

1. First, go to the Vivotek Downloads Page on a PC connected to the same network as your camera. 5. The camera will now begin to update and will reboot once complete.

How do I find my IP camera password?

By default, the IP Camera’s administrator password is admin. And you can change the password on User Management page. If you forget the password, the only way is to reset the IP Camera to factory default setting via hardware reset button.

How do I set up vivotek iViewer?

To establish a connection with VIVOTEK’s embedded Linux-based NVR, you need to enable the connection on a web console via Network > Service. Select the “Allow CMS and iViewer connection” checkbox, and enter the same password as that you use for login to an NVR console.

What is the default password for Cobra wireless surveillance system?

000000
Before you Begin. You will need your monitor screen and your phone with MyCamView installed so that you can check the device connects after the network password has been reset. The default password is ‘000000’, so it’s worth trying this first.

How do I recover my camera password?

If you forget the password, the only way is to reset the IP Camera to factory default setting via hardware reset button. To reset the IP Camera via the hardware reset button, please press and hold the reset button for more than 10 seconds and then all the settings will go to the default settings.

How do I unlock my DVR account?

Here are the ways you can recover from a lost password .

1. Use the DVR factory default password .
2. Use a DVR password generator.
3. Update the firmware and reset the DVR .
4. Reset the DVR by removing the battery.
5. DVR physical reset with jumpers.
6. Delete the password file by using telnet.