How do I set up bluetooth in my 2012 Jeep Grand Cherokee?

How do I set up bluetooth in my 2012 Jeep Grand Cherokee?

Go to the settings menu in an iPhone or Android device and turn bluetooth on. Search for the Uconnect option and select. The Cherokee’s information screen should display A4 digit code that will enable bluetooth connectivity. Enter the code on the device to connect.

How do I connect my bluetooth to my Jeep Grand Cherokee?

How to Set up Bluetooth in Your Jeep

  1. Make sure Bluetooth is activated on your mobile device and that the vehicle is stopped or in park.
  2. On your Jeep Uconnect screen, press the Phone button > Add Device > Settings.
  3. On your mobile device, select your Jeep from the Bluetooth menu.

How do you reset the Uconnect on a 2012 Jeep Grand Cherokee?

To reset the 2012 jeep grand cherokee radio you will do so by holding down the two dial button which are volum and broswe/enter for ten seconds and this will reset the radio.

Why is my bluetooth not working Jeep Grand Cherokee?

If the bluetooth is not working on the Jeep Grand Cherokee then You may need to reset it. It is a known issue for the bluetooth to become unpaired. Once You restarted Your gadget, wait for a while and go to bluetooth settings. Then, pair it with Your Uconnect.

How do I connect my phone to my 2012 Jeep Grand Cherokee?

Quick Pairing Tips for your Android Phone

  1. Press the Phone icon on your Uconnect® touchscreen.
  2. Press Yes when prompted.
  3. Go to settings/options in your Android phone.
  4. Under Bluetooth®, search for wireless networks.
  5. Select Uconnect®.
  6. When asked, enter the 4-digit number that appears on the Uconnect® screen and accept.

Why is my phone not connecting to my Uconnect?

Perform a hard reset in the phone by removing the battery (if removable – see your phone’s owner’s manual). Delete the pairing history in your phone and Uconnect® system, which is usually found in the phone’s Bluetooth® settings. Verify you are selecting “Uconnect” in the discovered Bluetooth devices on your phone.

How do you reset Uconnect 2012?

Q: How do I reset the Uconnect phone system?

  1. Press the Uconnect phone button, located on the steering wheel or the center console.
  2. When prompted, say “Setup.”
  3. Following the next set of prompts, say “Reset.”
  4. Confirm the reset by following the prompts.

How do you soft reset Uconnect?

For the latest Uconnect® version 8.4, this is how you can perform a soft reset of the system:

  1. Turn your key in the ignition to “Run,” but leave the car in park.
  2. Simultaneously press the volume button and the tuner knob at the same time.
  3. Continue pressing them down for 10 – 20 seconds.

How do I reset the Bluetooth in my Jeep Grand Cherokee?

Soft Reset Uconnect Press and hold down the upper rightmost corner of your infotainment screen until it switches off. This usually takes around 10 to 17 seconds. Once it switches off, remove your finger from the screen and wait for the Jeep logo to appear and then reappear.

How do you fix Uconnect Bluetooth?

How to Troubleshoot the UConnect Bluetooth

  1. Use a compatible phone with Uconnect.
  2. Verify the Bluetooth version on your phone.
  3. Enable Bluetooth on your phone.
  4. Turn on the car stereo and enter the Bluetooth pairing code.
  5. Pair the mobile phone with Uconnect.

Can you connect a Bluetooth phone to a Jeep Grand Cherokee?

In many models, you can also play music through a paired device over the Bluetooth connection too. Check your owners manual to see if this is possible in your 2012 Grand Cherokee. Some models only allow Bluetooth devices to take calls wirelessly, but require an input jack to play music from your phone.

Is there a coupon for a 2012 Jeep Grand Cherokee?

If your 2012 Jeep Grand Cherokee requires a password, try 1234, 0000 or ABCD. Advance Auto coupon for 20% off entire order: KIOSK20 Author Hans Angermeierhas produced over 100,000 videos showing drivers how to fix things on their cars.

How do I Turn on Bluetooth on my Uconnect?

Under Settings, press the Bluetooth® button and turn Bluetooth on. STEP 2: On your Uconnect® touchscreen Select “Phone”, Select “Settings”, press “Paired Phones” and then “Add Device”, or Select “Settings”, press “Phone/Bluetooth”, press “Paired Phones” and then “Add Device”.