How much does it cost to replace bearings on a trailer?

Some Class A RV owners have stated that it cost anything from $300 to $500 to replace the bearings. Depending on how much you use your trailer and how many miles you get on it, you can wait till about 20,000 miles before your wheel bearing has to be repacked.

How often should you change boat trailer bearings?

We recommended to repack the wheel bearings on your trailer every 12 months or 12,000 miles. There is not a specific guideline as far as actually replacing the bearings. When repacking them with grease, you will also just want to check for any damage or wear and replace anything if needed.

How often should trailer wheel bearings be repacked?

How often should you repack your trailer bearings? The axle manufacturers recommend that you repack your trailer bearings once annually or every 12,000 km. If you are over-do for trailer wheel bearing maintenance, we would be happy to help you.

How do I know if my trailer bearings need replacing?

Jack up the trailer and secure it on adequate capacity jack stands. Check wheels for side-to-side looseness – There should be a very slight amount of play in the wheel, typically 1/8-inch or less. If the wheels are loose or spin with a wobble, the bearings must be serviced or replaced.

Why do trailer bearings fail?

There are five primary causes of bearing failures. They are: lack of lubrication, overloading the vehicle, installing the axle nut too tight, or installing the axle nut too loose, contamination of the grease due to missing / defective grease caps and seals.

How many miles do trailer bearings last?

With proper and frequent maintenance, your wheel bearings should last for 100,000 miles before they wear out. How Much Grease to Put In A Trailer Wheel Bearing?

Should trailer bearings get warm?

When loaded correctly, the hubs should feel warm to the touch, not hot. If you cannot keep your hand on the hub comfortably, the bearings are loaded to tight or in need of maintenance.

What kind of wheel bearing do I need for a boat trailer?

Below are Trailer Wheel Bearing Kits for 4 Bolt Trailer Hubs, 5 Bolt Trailer Hubs, 6 Bolt Trailer Hubs and 8 Bolt Trailer Hubs. These Wheel Bearing Kits come and complete allow you to replace your damaged wheel bearings and grease seals.

How to replace bearings, races and seals on a trailer hub?

Hub assemblies are available that include the bearings, races and seals. After the bearings and races have been worked out, clean the inner part of the hub. Remove any extra grease or buildup you see. Make sure that the inner hub is as clean as possible. This will help make it easier to reinstall the races and bearings.

How to read reviews for masterpro trailer bearing kit?

Read reviews for MasterPro Trailer Bearing Kit When autocomplete results are available use up and down arrows to review and enter to select. Touch device users, explore by touch or with swipe gestures. When autocomplete results are available use up and down arrows to review and enter to select.

How can I tell if my trailer wheel bearings are defective?

To assess their condition, tow the trailer for ten miles on the highway then check the temperature of the wheel hubs. If they’re too warm to touch, the hub bearing may be defective. O’Reilly Auto Parts carries wheel bearings and seals, as well as hub assemblies, trailer brake assemblies, and more for most trailers on the road.