How to install iSCSI initiator on Windows 2003?

1. Launch Server Manager > Tools > iSCSI Initiator or Control Panel > Administrative Tools > iSCSI Initiator 2. Select Yes to start the Microsoft iSCSI service 3. Re-launch iSCSI initiator, then follow the steps in Windows 2003 section

How does multi-path iSCSI work in a server?

This is achieved by means of the 10 Gigabit trunk between the two switches. This is therefore, two paths to the storage – one source interface, and two target interfaces. Similarly, Port B of the server can talk to Channel 4 of Controller A and Controller B – thus providing 4 channels to the storage.

How to add MPIO to Windows Server iSCSI?

Add and Configure MPIO. 1 Click Manage > Add Roles And Features. 2 Click Next to get to the Features screen. 3 Check the box for Multipath I/O (MPIO). 4 Complete the wizard and wait for the installation to complete.

How to connect to a single target in iSCSI?

Going back to your iSCSI Initiator on your server, select the “Targets” tab. If all has gone well, you should see a single target (i.e. your SAN), and the status is Inactive. Highlight the target, then click on “Connect”.

When to use iSCSI target server in the lab?

Development, test, demonstration, and lab environments When iSCSI Target Server is enabled, a computer running the Windows Server operating system becomes a network-accessible block storage device. This is useful for testing applications prior to deployment in a storage area network (SAN).

How are HBAs and initiators used in SCSI?

A target, like HBAs and initiators, is an end point in SCSI bus communication, passing command descriptor blocks (CDB) to request or provide storage transactions. To provide access to the storage or output device, a target is configured with one or more logical unit numbers (LUNs).

How to list available firewall rules for msiscsiservice?

To list available firewall rules related to the MSiSCSIservice, use the following command: 2. Connecting to available iSCSI Targets: 3. Listing iSCSI Connections and sessions: 4. Listing all Windows disks for a specific iSCSI session: 5. Listing the iSCSI IQN for the iSCSI Initiator