Helpful tips

What does it mean when my Canon printer says the ink absorber is almost full?

What does it mean when my Canon printer says the ink absorber is almost full?

The message Ink Absorber Full is an indication that the machines internal ink absorbers are almost full. These ink absorbers are used to hold ink after it has been purged from the print head during the print head cleaning cycles.

How do you remove a Canon ink absorber?

  1. Take a bowl with warm water and add some soapy material.
  2. Open the ink cartridge compartment.
  3. wait for ink cartridges and disconnect the printers power cord.
  4. Look balck rubber frame under the ink cartridge.
  5. pull the rubber frame out of the printer and remove ink absorber pads.
  6. clean the pads in the bowl.

How do I clear the error on my Canon Pixma printer?

Reset the Canon printer

  1. Switch on the printer.
  2. Press and hold the Stop/reset button.
  3. Press the button that you use to make a color copy and hold it down.
  4. Wait 5 seconds.
  5. The printer now reboots and sets itself up.
  6. Does the printer indicate that the device needs to be calibrated?
  7. You’ve reset your printer.

How to reset waste ink counter canon Pixma mp145?

Here the reset procedure to reset waste ink counter on Canon Pixma MP145 : With the Printer power off, press the Power button while press and hold Stop/Reset button. When the Power led is light, press Stop/Reset button two times while pressing and holding the Power button.

Why is the ink absorber on my Canon printer not working?

So, if I understand this correctly, my printer was working fine until Canon forces me to pay you to fix a problem that your company created. The ink absorber works on a counter and not on a measurement of ink in the actual absorber. This sounds like financial extortion by Canon.

What was the error on my Canon printer?

Digitone Work also AUDIO & VIDEO Production. Our team develop Software web & desktop based. An error occurred while retrieving sharing information. Please try again later. A printer’s ink pad is at the end of its service life.

How to solve ” ink absorber is almost full “?

Go to Solution. Re: “ink absorber is almost full.” 07-28-2015 11:51 AM Hi, kelneka! So that the Community can help you better, we will need to know exactly which Canon printer model you’re using. That, and any other details you’d like to give will help the Community better understand your issue!