Popular lifehack

What fluids does a Jeep Wrangler need?

What fluids does a Jeep Wrangler need?

*75w-140 recommended in rear differentials for warm weather towing applications. For axles with the Trac-lok differential add 4 oz….Jeep Wrangler TJ Fluid Capacities.

Component Quantity Fluid Type
2.5L Engine Oil 4 Quarts / 3.8 Liters 10w-30 or 5w-30
2.4L Engine Oil
Brake Fluid Fill to Full Mark DOT 3
Clutch Fluid

How much fluid does a Dana 30 hold?

Jeep Wrangler Differential Fluid Capacity Chart

Jeep Wrangler JL Differential Fluid Capacity
Axle: 186 – Front Axle Non Rubicon Capacity: 1.82 Pints
Axle: Dana 30 Axle Capacity: 1.3 Quarts / 1.2 Liters
Axle: Dana 35 Axle Capacity: 1.8 Quarts / 1.7 Liters
Axle: Dana 44 Axle Capacity: 2.0 Quarts / 1.9 Liters

What kind of oil does a 92 Jeep Wrangler take?

Engine Oil

Viscosity: 10W-30 (Above -18) 5W-30 (Below 16)
Capacity: 4 quarts (with filter)After refill check oil level.
Torque: 30 ft/lbs (Oil Drain Plug)

How many quarts of transmission fluid does a Jeep Wrangler take?

4 quarts
Expect to need about 4 quarts, but do not overfill. With the transmission in Park and the parking brake set, run the engine at a fast idle for a minute, but don’t race it.

What kind of oil does a 4.0 Jeep take?

Engine Oil

Viscosity: 10W-30 (Above -18) 5W-30 (Below 16)
Capacity: 6 quarts. (with filter)After refill check oil level.
Torque: 25 ft/lbs (Oil Drain Plug)

What fluid does a Dana 44 take?

Axle Differential (Rear)226 RBI (Model 44)– We recommend you use Mopar Gear& Axle Lubricant (SAE 80W-90) (API GL-5) or equivalent. For trailer towing, use Mopar Synthetic Gear & AxleLubricant (SAE 75W-140).

Can you use synthetic oil in Jeep Wrangler?

The best oil for your jeep Wrangler is clean oil. Jeep owners recommend any of the below brands: Mobile 1 High Mileage Full Synthetic (10W-30) Royal Purple 5w-20.

What kind of oil does a 1991 Jeep Wrangler take?

Engine Oil

Viscosity: 10W-30 (Above -18) 5W-30 (Below 16)
Capacity: 6 quarts (with filter)After refill check oil level.
Torque: 30 ft/lbs (Oil Drain Plug)

What transmission fluid does a 97 Jeep Wrangler take?

Valvoline – DEXRON®-VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No. 822405)

How much transmission fluid does a 97 Jeep Wrangler?

For Automatic Transmission: 32RH….AP4

Notes: Mopar ATF+4 P/N 05013457AA
Capacity: 3 speed 32RH Total Fill 8.6 quarts 4 quarts Initial Fill

What happens if I put 10W30 instead of 5W30?

Most oils will mix perfectly, provided they have a similar synthetic. Therefore, there is no problem in mixing 10w30 and 5w30 since one will be topping up. Mixing the viscosity of oils will not have any effect on the engine. 5w30 and 10w30 engine oils have close viscosity, and thus there is no harm in mixing them.

What kind of fluid does a Jeep Wrangler use?

Jeep Wrangler JK Fluid Capacities Component Quantity Fluid Type Clutch Fluid Fill to Full Mark DOT 3 Power Steering Reservoir Fill to Full Mark ATF 4 3.8L Cooling System 13 Quarts 50/50 Antifreeze/Water Mix 3.6L Cooling System (2013-2018) 10.5 Quarts 50/50 Antifreeze/Water Mix

How much oil does a Jeep Wrangler take?

Jeep Wrangler JK Fluid Capacities Component Quantity Fluid Type 3.8L Engine Oil 6 Quarts / 5.7 Liters 5w-20 3.6L Engine Oil 6 Quarts / 5.6 Liters 5w-20 Brake Fluid Fill to Full Mark DOT 3 Clutch Fluid Fill to Full Mark DOT 3

How many liters does a Jeep Wrangler have?

Jeep Wrangler JK Fluid Capacities Component Quantity Dana 30 Axle 2.1 Pints / 1.0 Liters Dana 35 Axle 3.5 Pints / 1.7 Liters Dana 44 Front Axle 2.7L / 1.3 Liters Dana 44 Rear Axle * 4.75 Pints / 2.25 Liters

What does W mean on a Jeep Wrangler oil rating?

The “w” in the viscosity indicates the oil’s viscosity in winter temperatures. Generally, a faster flowing oil in colder temperatures is desirable because this means more internals get oil at startup faster than a slower flowing oil, reducing wear and tear on your engine. In terms of gear oil, you’ll see ratings like GL-3 and GL-4.