What is an anthony door?
x. Founded in 1958, Anthony is a manufacturer and solutions provider of glass refrigerator and freezer doors, lighting systems and display equipment for use in commercial refrigeration systems worldwide. Anthony’s products are designed to enhance merchandising, ensure food safety and protect the environment.
How do you adjust hinges on a cooler?
Procedure for Adjusting Door Hinges
- Pry the hinge cover off with a screwdriver.
- Loosen all the lag screws on the hinge using the appropriate ratchet or hex driver.
- Turn the center adjustment screw clockwise to pull the door toward the hinge.
- Tighten the lag screws once the door is properly parallel to the door section.
How do you adjust a Kason hinge?
Adjust tip of door up by turning top hinge adjustment screw clockwise (opposite for Left Hand Door) and the bottom hinge adjustment screw counter- clockwise (opposite for Left Hand Door) so door spacing is even. 5. Tighten 4 mounting screws on each hinge.
Can you take fridge doors off?
It is not difficult to remove a refrigerator’s door. Whether you need to fit your refrigerator through a small doorway or you’re throwing it away, you’ll need to do what appliance delivery pros do every day: remove the doors. You’ll also have to do this if you want to reverse the doors on your French door model.
Can fridge doors be removed?
Some repairs require removing the door, such as replacing the hinge cam or the bottom hinge assembly. When disposing of, or storing a refrigerator, the U.S. Consumer Product Safety Commission suggests removing the refrigerator door to avoid the possibility of a small child becoming trapped inside.
How much does a torsion spring replacement cost?
Torsion Spring and Bar Replacement Cost Torsion spring replacement costs anywhere from $75 to $150 per spring, including both materials and labor. The springs alone run $30 to $100 each. You’ll almost always have two springs per door, and you should replace both at the same time.
How do I know if my TorqueMaster spring is broken?
The best way to identify a broken TorqueMaster spring is not by sight, but by sound. When your garage opens or closes, a broken TorqueMaster will sound like a rollercoaster clicking its way up a hill. Additionally, if you were able to get the door open, you will not be able to get it down.
Who is the owner of Anthony refrigeration company?
Anthony is currently owned by the Dover Corporation, which was founded in 1955 and is a large manufacturer of industrial products. Read more Anthony’s range of products includes everything from sliding refrigerator doors to lighting and shelving.
How big is the door on an Anthony freezer?
Door comes widths of 24”, 26”, 28”, and 30” single left or right swing configuration available for walk-in coolers or reach-ins with center mullion. (French Swing not available on 401 Series)
When to replace a refrigeration gasket with Anthony?
Choose Anthony replacement refrigeration gaskets to keep your cold equipment’s doors closing tightly and save money on energy costs. If your kitchen appliances or small equipment feel loose, Anthony screws will replace worn-out parts to keep them tightly secured.
Where to find Anthony Work Order Number on door?
Anthony Work Order number (W/O#) and Door Model can be found on data label located on top of door.