What tools do you need to take apart a PS3?

Tools Featured in this Teardown

1. Phillips #1 Screwdriver.
2. Spudger.
3. T8 Torx Security Bit Screwdriver. $5.99.

How do you open a fat PS3?

Remove the HDD cover on the left side of the PS3. You will need to unscrew a blue screw that is very easy to strip, so be careful when unscrewing it. Pull the hard drive straight out once you remove the screw. While you are looking at this side, remove the sticker towards the top of the case to reveal a Torx screw.

Which screwdriver is used for PS3?

Compare with similar items

What screwdriver Do you need to open a PS3?

Use the Torx Screwdriver (T8 or T10) to remove the torx screw from the space behind the rubber foot. This screw has a security bit but most are able to remove it successfully with a normal Torx driver.

What’s the best way to clean out a PS3?

If you want to protect your PlayStation, you may want to take a stab at cleaning out the insides. This can be a daunting task, as the PlayStation 3 is carefully constructed, but with a little preparation you can take a lot of the stress out. See Step 1 below to get started. Disconnect the PS3.

Is the PlayStation 3 60GB card still working?

This is a teardown of an original launch 60GB PlayStation 3 system. One of the best units out there that had backwards compatibility and the card readers. Sadly this unit has a GPU a problem so it’s broken.

How do you remove the hard drive from a PS3?

Luckily, the hard drive on the PS3 is fairly simple to remove. Remove the HDD cover on the left side of the PS3. You will need to unscrew a blue screw that is very easy to strip, so be careful when unscrewing it. Pull the hard drive straight out once you remove the screw.

Is there a way to repair a PS3?

To repair your PlayStation 3, use our service manual. There she is, one of the two original PS3 models available at launch (60GB). It’s got PS2/PS1 backwards compatibility and a multi-card reader.