What spark plug does a Toro Recycler 22 use?

Where is the model number on a Toro Recycler 22?

A black plate on the front of the mower says “Toro Recycler 22.” Model number 20337 and a serial number are located on a decal affixed to the rear of the machine.

What year is a Toro 20017?

Manufacturing for Toro 20017 Recycler Lawn Mower began in 2002 and was made through 2006. This quick parts reference guide will provide you with the most common needed parts for your Toro 20017 Recycler Lawn Mower .

Do Toro lawn mowers have spark plugs?

You probably know that this little plug produces the powerful spark that starts your mower. Your local Toro service dealer is the best place to get the correct replacement spark plug for your machine. Bring your machine’s model and serial number so you’re sure to get the right plug.

What size socket do I need for spark plug?

Most spark plugs require a 5/8″ (16mm) size spark plug socket. This refers to the size of the flats on the spark plug that are in contact with the socket. This spark plug requires the 5/8″ spark plug socket, which will probably fit a 3/8 ratchet extension.

How do I know what model Toro I have?

The model number sticker on a Toro rear engine rider can be located under the seat, on the side panels, or on the frame next to the engine. The model number sticker on a Toro zero turn can be located next to the right control lever, on the frame under the seat, or below the fuel tank.

Where is serial number on Toro lawnmower?

The model and serial can be found on the back-right portion of the machine. As you can see, it’s below the bagger chute.

How do I read my Toro serial number?

Toro MODEL NUMBER LOOKUP

1. The model number on your Toro walk-behind lawn mower will usually be located on the back of the housing, under the bag retaining flap.
2. Zero-Turn Rider, Out Front Z.
3. Steering tower, left side.
4. Handle, lower right.
5. Frame, rear.
6. Model and serial number are located on the housing.

What size socket do I need to remove a lawn mower spark plug?

Spark plug sockets come in two sizes: 5/8 inches and 13/16 inches. Most spark plug sockets have a rubber insert that holds the plug snugly in place. You may also need a universal joint if your spark plugs are difficult to reach.

How often should you change a spark plug on a Toro lawn mower?

200 hours
The Toro Co. recommends checking the spark plug in one of its gasoline-powered lawnmowers after every 100 hours of its use. It also recommends changing the spark plug at the beginning of every mowing season or after 200 hours of mower operation, whichever comes first.

What kind of spark plug do I need for my Toro Lawn Mower?

A Champion QC12YC is the correct spark plug to use. Thank you. Is this compatible with my Toro Recycler 22? Spec PH-XT-675-2034, Serial 4326808008 We will need your mowers model number to determine the correct replacement part. You can also contact Toro Customer Support at 1-888-384-9939.

Where do I find the serial number on my Toro Lawn Mower?

Whenever you need service, genuine Toro parts, or additional information, contact an Authorized Service Dealer or Toro Customer Service and have the model and serial numbers of your product ready. Figure 1 identifies the location of the model and serial numbers on the product. Write the numbers in the space provided.

What do you need to know about Toro Lawn mowers?

It is designed primarily for cutting grass on well-maintained lawns on residential properties. It is not designed for cutting brush or for agricultural uses. Read this information carefully to learn how to operate and maintain your product properly and to avoid injury and product damage.

What happens to the spark plug on a craftsman lawn mower?

The spark plug ignites the fuel and air mixture in the cylinder to power the engine. If the spark plug is burnt, fouled or damaged the engine may not start or may run rough. Champion Spark Plug (RCJ8Y). The spark plug ignites the fuel and air mixture in the cylinder to power the engine.