How do you unlock a Diebold safe?

1.5 To Unlock a Four-number Combination

1. Turn the dial to the counterclockwise at least five complete rotations to clear the lock.
2. Turn the dial clockwise, stopping when the first number of the combination is aligned with the opening index the fifth time.

How do I reset my safe dial?

Rotate the dial in a clockwise motion for three complete rotations to reset the lock. Keep turning the dial clockwise until you reach the first number in the combination, then stop. Turn the dial counterclockwise a full rotation, and continue until you reach the second number in the combination.

How do you open a combination with 4 numbers?

Dialing a Safe

1. Start by turning the dial to the RIGHT a minimum of 4 turns (this clears the dial of any previous attempts) and STOP on the FIRST number of your 4 digit combination.
2. Turn the dial to the LEFT passing the SECOND number TWICE, stopping on the SECOND number of your combination on THIRD turn.

How old is my Diebold Safe?

Incorporated: 1876 as Diebold Safe & Lock Co. In the wake of the 1871 Great Chicago Fire, natural disaster proved a boon for Diebold Bahmann & Co.

How do you open a 4 number Lock?

TO UNLOCK ON A TRUE FOUR NUMBER COMBINATION Starting anywhere, turn the dial right (clockwise), stopping when the first combination number comes to the opening index the FIFTH time. 2. Turn the dial left (counterclockwise), stopping when the second number comes to the opening index the FOURTH time. 3.

How do you open a 4 digit lock?

How to Open a Four Number Combination Lock

1. Find your combination.
2. Go to the first number.
3. Set the second dial on the lock to the second number in the combination.
4. Use the third wheel to find the third number in the combination.
5. Locate the fourth number in the combination on the bottom wheel on the lock and center it.

How do you open a digital safe if you forgot the combination?

You can still open your digital safe without a key by restoring power to the keypad so you can enter your passcode. If you’ve forgotten your passcode, you can reset it by using a thin rod or wire to press the reset button on the inside of the door panel.

What do you do if your Sentry Safe won’t open?

Turn your back to the safe, and kick the door, hard, a few times. Be sure that you do not kick the keypad or the handle. This will help loosen the bolt work. Next, pull the handle in the opposite direction than you normally do and enter the code.

What is the factory code for a Sentry Safe?

62044
Here we go: Before we begin, locate the 5-digit factory code located on the back of your owner’s manual, and enter the code to open the door. This safe is set to “62044.” To program the primary-user code, press the [P] button and enter the 5-digit factory code on the electronic keypad.