How do I install HP ProLiant support pack?

Initiating offline deployment

1. Copy the SPP to a USB thumb drive, hard drive, or file system. When using a USB thumb drive, the ISO must be bootable.
2. Boot the server so it launches the operating system on the SPP ISO.
3. Select either automatic mode or interactive mode:
4. Use SUM to deploy updates to the server.

What is Service Pack for ProLiant?

The Service Pack for ProLiant (SPP) is a simplified and consolidated set of firmware, drivers, and system software that provides easy server management, enables a 3x faster online update, and is an integral part of the HPE server update experience.

How do I check my HP ProLiant support pack?

You can view the HP SPP version information in the Start. htm file in a web browser. The file is in the root directory of the HP SPP. I hope you find this information helpful.

What operating systems are supported on the ProLiant DL380 G7?

What operating systems are supported on the ProLiant DL380 G7?

• Microsoft Windows 2003 (all version except for DataCenter edition)
• Microsoft Windows 2008.
• LINUX 5 (Red Hat®, SuSE®, United)
• Solaris 10.
• VMware (ESX3. 5,ESX4, ESXi4. OU4)/ Xen Source/RH and SLES XEN/ Windows Server 2008 Hyper-V.

How do I find my iLO firmware?

FIX: The BIOS and iLO firmware versions can be determined from the command line by using the dmidecode command to retrieve BIOS information. For example: # dmidecode -t bios # dmidecode 2.11 SMBIOS 2.7 present.

How do I know what version of HPE SPP I have?

Go to https://www.hpe.com/info/spp. Select Download >>. Select >> Current Version.

What is SPP HP?

The Gen10 Service Pack for ProLiant (SPP) is a comprehensive systems software and firmware update solution, which is delivered as a single ISO image.

How do I raid HP dl380 g7?

To get to the RAID setup options, when the screen appears showing the F9 and F11 options press F8 every second or so, and you’ll first get the ILO configuration. Exit ILO, and next you’ll get the RAID configuration options. I found this tip mentioned in this post on the HP forums here.

How do you enable ILO in HP ProLiant dl380 g7?

Press F8 in the HPE ProLiant POST screen. The iLO RBSU screen appears. The Network Autoconfiguration window opens. Press the spacebar to set DHCP Enable to OFF, and then press F10 to save the changes.

How do I update my iLO 5?

Click Firmware & OS Software in the navigation tree, and then click Update Firmware. If the Update Firmware option is not displayed, click the ellipsis icon in the top right corner of the iLO web interface, then click Update Firmware.

How do I update my HP ProLiant dl360 g9?

To update firmware on a ProLiant Gen9 Server:

1. On the Intelligent Provisioning home screen, click Perform Maintenance.
2. Select Firmware Update from the maintenance options. The firmware Update window is displayed.

What is the HP ProLiant dl380 G7 maintenance and service guide?

HP ProLiant DL380 G7 Server Maintenance and Service Guide Abstract This guide describes identification and maintenance procedures, diagnostic tools, specifications and requirements for hardware components and software. This guide is for an experienced service technician.

When did I Buy my dl380 G7 servers?

Help: I have two DL380 G7 Six-core Xeon servers acting as text-to-speech servers for the public. They take text input and recite names and addresses on request. My networking team is telling me we need to repalce these as we purchased them in 2011.

Is there cutomer support for dl380 Gen 7?

While some of use that participate in the forums may work for HPE, this is not an official HPE support mechanism, There is a good chance the person that responded doesn’t work for cutomer support and was just trying to provide another option to possibly get your question answered No support by private messages. Please ask the forum!

Where can I download the HP dl380 G7 Smart Start CD?

Have recently bought a second hand HP DL380 G7 and need the SMart Start CD for iLO etc. Does anyone have access to or know where I can download an ISO for this?