Users' questions

How do I reset my Saturn Ion?

How do I reset my Saturn Ion?

Press the reset/trip button located on the display face inside the Saturn Ion and Relay models until the oil life display is present. Press the trip/reset button down until you hear chimes and the oil life display resets to 100 percent.

How do you reset a 2004 Saturn Ion?

2004-2007

  1. Turn ignition switch to ON position with engine off.
  2. Press the TRIP/RESET button to cycle through the menus until you get to the “Oil Life” display.
  3. Press and hold the TRIP/RESET button until a chime sounds 5 times and “Reset” is displayed in the message center.

How do you reset the change oil light on a 2007 Saturn Ion?

2003-2007 Saturn Ion Oil Life Light Change Oil Minder Reset Guide

  1. Turn the ignition key to the “ON” position.
  2. Press the TRIP button repeatedly until you see Oil Life on the display.
  3. Press the TRIP button for several seconds.
  4. Turn the ignition off and start the engine to verify the indicator has been reset.

What does oil life mean Saturn Ion?

The Engine Oil Life System calculates when to change the engine oil and filter based on vehicle use. Anytime the oil is changed, reset the computer so it can calculate when the next oil change is required.

How do you reset the oil life on a Saturn?

How to Reset Oil Life: Saturn Aura 2007-2009

  1. 1-Turn the ignition to run (second position)
  2. 2-Press the INFO button to scroll until the Oil Life displays.
  3. 3-Press the INFO and RESET (arrow) buttons on the steering wheel at the same time to display OIL LIFE RESET.

What does oil life mean on Saturn Ion?

The oil life meter is located on the information display of the dashboard, and will count down from 100% oil life to 0% oil life as you continue to drive the vehicle. If the Oil Life Monitor system has not triggered on your Saturn for a year or more, take your vehicle in for servicing as soon as possible.

How do you reset the check engine light on a 2005 Saturn Ion?

in the underhood fuse box is a reset button. turn the key to on depress the button till the light goes out and let go. turn key off and then start it up and all should be well.

How do you reset a 2008 Saturn Aura?

2008-2009

  1. Turn ignition switch to ON position with engine off.
  2. Fully depress and release the accelerator pedal 3 times within 5 seconds of turning key.
  3. Change Oil lamp will flash for 2-10 seconds while it resets.
  4. Once it stops flashing, the maintenance light reset is complete.

How do you reset the check engine light on a Saturn Aura?

A few different ways to reset your check engine light are:

  1. Let it go off by itself.
  2. Turn your ignition on and off several times in a row.
  3. Disconnect your battery and reconnect it.
  4. Buy an OBD II scanner (they’re relatively inexpensive) and follow the instructions (it’s pretty easy)

How do you reset the check engine light on a Saturn?

You can do this by constantly blowing the car’s horn until it dies or turning on the headlights, then waiting several minutes. This will ensure all electrical current has been drained from the car’s capacitor. At this point, it should be safe to reconnect the battery and the check engine light should not longer be lit.

How do you reset an ion water cooler?

To reset the ION, simply unplug and reconnect power OR open the Filter Door and quickly press the Filter Reset button. This indicates the ION Bottleless Water Cooler is in Startup mode and is trying to fill the Cooling system. Please allow a few minutes. If the LEDs turn RED, unplug the ION and start again.

How to factory reset the shark Ion Robot?

2) Factory Reset via the Shark Ion Robot 1 You need to turn the Shark Ion Robot upside down and locate its on and off switch. 2 Press the button for at least 10 seconds until it turns off. 3 Wait for at least 10 seconds, then press it again to turn the device on. 4 The Shark Ion Robot should be reset and rebooted. More

Where is the filter timer on the ion?

You’ll receive a reminder on your Touch Screen when you have reached your usage point. Important! Make sure to reset your Filter Timer after a new filter has been installed. The Filter Timer is located with the Filter section of the Touch Screen Menu. How much space is required for the ION and AquaStand?

How to reset a shark ion garbage disposal?

Press the button for at least 10 seconds until it turns off. Wait for at least 10 seconds, then press it again to turn the device on. The Shark Ion Robot should be reset and rebooted. How to Repair a Clogged Garbage Disposal in 6 Easy Steps?