What is push in connection?

Push-in connection technology in detail The push button permits easy conductor release using any type of tool, without direct contact with live parts. To connect flexible conductors of 0.14 mm² or more without ferrules, the button simply needs to be actuated during insertion.

What are push in terminals?

Push-on terminals are flat female and male terminals with a blade type connector that mates with each other to connect or quick disconnect a wired connection. To create a wired connection, simply install the wire to a male and female terminal, put them together and push on them to create the secured connection.

What is terminal block connector?

Terminal blocks are connectors that terminate a single wire and connect it to a circuit or other system. The most common connection method for terminal blocks is the use of a screw, wherein wires are inserted and then clamped down with the use of a single screw.

What is Phoenix Contact Valvetrab?

Phoenix Contact VALVETRAB-MS T1/T2 provides varistor-based lightning protection with a high discharge capacity and low residual voltage for Type 1 or Type 2 lightning level applications. VAL-MS-T1/T2 can safely discharge 12.5kA I-imp (10×350) of lighting current.

Can you reuse push in wire connectors?

Connector is reusable on solid wires of the same wire gage or larger. In order to remove a wire, pull and twist the wire back and forth. DO NOT RE-USE connector on stranded wire.

How does a push in connection connection work?

With PUSH IN connections, the prepared conductor is simply inserted into the clamping point and a reliable, vibration-resistant, and gas-tight connection is established. The integrated pusher allows the conductor to be easily released with a screwdriver. The conductor is simply inserted into the clamping point up to the stop.

How are conductors inserted in a push in connection?

The resulting straight conductor routing from the terminal block to the cable duct makes it much easier to attach and read wire markings. With the Push-in connection, you can insert conductors from 0.25 mm² directly and without tools. To insert conductors from 0.14 mm², simply press the orange push button.

How does push in technology work for KNX?

The Klippon® Connect KNX-terminal blocks provide the wiring of the main and reserve leads for KNX Bus wiring systems within a 7 mm combined block width. Klippon® Connect pluggable terminal blocks with PUSH IN connection technology combine the advantages of our unique connection technology with the flexibility of our connectors.

What are the advantages of push in technology?

Our AWPD modular terminal blocks for power distribution combine the advantages of clamping yoke and PUSH IN technology in one product. Additional connections on the feed disc reduce components and save assembly time. Depending on the system structure, further space savings of 3.5 or 5.1 mm are possible.