What size injectors does a VQ35DE have?

VQ35DE: 335cc @ 3.5 BAR (FBJC100, 350z etc.)

What size are RSX injectors?

They are 310 cc.

What CC is stock B series injectors?

they are all 240 cc, all b and d series with MPFI that is, im not sure what size the DPFI injectors are.

What size are stock RB25DET injectors?

If it is the normale RB25DET you have 370cc side feed injectors. And a good rule of thumb is that 1cc for every 1hp you want to make. Now you have an upratede fuel pump so you will be able to run a higher fuel pressure to get a bit extra.

How many cc are stock 350Z injectors?

VQ35DE: 335cc @ 3.5 BAR (FBJC100, 350z etc.) The ’05 350Z (not the rev up engine) have a different injetor part number and I do not know if they’re still 335cc. The answer is at the click of a button …

How many fuel injectors does a 350Z have?

There is one injector per cylinder in an engine.

What size are K series injectors?

They are a 48mm long body, shorter than normal injectors. The adaptor tops make them “normal” 60mm length and adapt them to 11mm (B series) or 14mm (K series) orings. The K series guys can run the injectors with no adaptors at all and they are the same length as the OEM rsx injectors so no spacers needed on the rail.

How much oil does a k20 take?

5 quarts. (with filter)After refill check oil level.

What size are GSR injectors?

7th post down – GSR, ITR, GS, LS all have the same size injectors: 240cc saturated.

How much boost can a stock rb25det handle?

Stock turbo can do max of . 85 bar, which depending on supporting mods and remap will get you about 320-330bhp.

How much power can a RB25 neo handle?

The NEO engine in it’s stock form will run 500hp reliably. It’s far stronger and more robust than the series 1/series 2 RB25 engines.

When did the Honda D16Y8 engine come out?

Honda D-Series engines were produced from 1986 to 2007 and powered some of the most popular Honda models throughout the 1990’s. In the United States the D16Y8 engine was found in Honda Civic EX models from 1996 to 2000. It also appeared in the Honda Del Sol Si until 1997.

What’s the compression ratio on a Honda D16Y8?

Finally, the compression ratio was 9.6:1. The Honda D16Y8 engine uses an aluminum alloy block as well as an aluminum cylinder head. The alloy construction helps keep the engine lighter, and light engines mean better acceleration and better fuel consumption.

Which is better Honda Civic EX or D16Y8?

The Honda Civic EX had significantly more horsepower than the engine found in the base model. The D16Y7 base model engine had only 106 hp compared to 127 hp in the D16Y8 with VTEC. In 2001 the D16Y8 was phased out in in favor of the D17A2 which had larger displacement thanks to a longer stroke and other modifications.

When did Honda replace the D16Z6 in the Civic EX?

The D16Y8 replaced the D16Z6 engine in the sixth generation Honda Civic EX starting in 1996. The Honda Civic EX had significantly more horsepower than the engine found in the base model. The D16Y7 base model engine had only 106 hp compared to 127 hp in the D16Y8 with VTEC.